Lincoln Electric 10,000 PLUS Recommended Equipment, Stick, Wire Feed, TIG Welding, Plasma Cutting

Page 23

C-2

ACCESSORIES

C-2

 

 

 

RECOMMENDED EQUIPMENT

STICK

K704 ACCESSORY SET - Includes 35 ft. (10m) of electrode cable and 30 ft. (9.1m) of work cable, head- shield, work clamp electrode holder. Cables are rated at 400 amps, 100% duty cycle.

K875 Accessory Kit - For stick welding. Includes 20 Ft. (6.1m). #6 electrode cable with lug, 15 Ft. (4.6m) #6 work cable with lugs, headshield, filter plate, work clamp, and electrode holder and sample pack of mild steel electrode. 150 amp capacity.

WIRE FEED

K449 LN-25 - Includes internal contactor for across the arc operation (no control cable). Provides “cold” electrode until gun trigger is pressed. Includes gas solenoid.

K1870-1 LN-15 Across the Arc

Magnum Gun and Magnum Gun Connector Kit are required for gas-shielded welding. Innershield Gun is required for gasless welding.

K126-2Magnum 350 Innershield Gun (for LN-25, LN- 15).

K1802-1Magnum 300 MIG Gun (for LN-25, includes Connector Kit).

K470-2Magnum 300 MIG Gun (for LN-15, requires

K466-10 Magnum Gun Connector Kit).

K1500-1Gun Receiver Bushing (for LN-15, K126-2)

Note: See Wire Feeder IM Manual for appropriate Drive Roll & Guide Tube Kits.

TIG WELDING

K1783-9-PTA-26V TIG Torch.

KP509- Magnum Parts Kit and Argon gas.

K930-2-TIG Module.

Required TIG Equipment:

K938-1 Connector Kit

K936-4 Control Cable

K814 Arc Start Switch

Optional TIG Equipment:

K939-1 Docking Kit

K937-45 Control Cable Extension

PLASMA CUTTING:

K1580-1 Pro-Cut 55

Cuts mild steel using the 3-phase AC generator power from the engine driven welder. Accepts 3-phase or 1- phase input power. Requires the K1816-1 Full KVA adapter kit, if connected for 1-phase input power.

RANGER 10,000 PLUS AND RANGER 10,000

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Lincoln Electric Ranger 10,000 PlusCalifornia Proposition 65 Warnings SafetyElectric Shock can kill Iii Welding Sparks can cause fire or explosionSûreté Pour Soudage a L’Arc Précautions DE SûretéThank You Table of Contents Height Width Depth Weight InstallationTowing Safety PrecautionsMachine Grounding Spark ArresterGasoline PRE-OPERATION ServiceBattery Connections Angle of Operation Welding Output CablesTotal Combined Length of Electrode and Work Cables High Altitude OperationInstructions Motor Starting Auxiliary Power120/240 Volt Dual Voltage Receptacle Duplex ReceptaclesNone Type Common Electrical Devices Possible ConcernsStandby Power Connections Auxiliary Power While WeldingSimultaneous Welding and Power Power Welder Controls Function and Operation Engine SwitchOperation General DescriptionKohler Subaru Robin Honda Polarity SwitchRange Switch Control DialStopping the Engine STARTING/SHUTDOWN InstructionsBREAK-IN Period Starting the EngineTIG Constant Current Welding Diameter Wire Speed ApproximateWelding Process Stick Constant Current WeldingStick Auto K1745-1 Welding GAS Cylinder LPG Tank Holder AccessoriesTIG Welding Wire FeedRecommended Equipment StickEngine OIL Refill Capacities MaintenanceSafety Precautions Engine OIL ChangeOIL Filter Change AIR Cleaner and Other MaintenanceSlip Rings Engine AdjustmentsBattery Overspeed is HazardousHOW to USE Troubleshooting Guide TroubleshootingTroubleshooting Troubleshooting 10,000 DiagramsRanger 10,000 Plus and Ranger Enhanced Diagram F-2 Plus RangerRanger 10,000 Ranger 10,000 PlusRanger 10,000 Plus and Ranger 10,000 Precaucion Warnung
Top Page Image Contents