COMPONENTS AND DESCRIPTION
COMPONENTS
The shipping carton for your painting system contains the following:
•Suction set and return tube
•Spray gun with filter
•Spray tip assembly (see chart below)
•50 foot long, 1/4 inch diameter pressure hose
•Separating Oil
CONTROLS AND FUNCTIONS
ON/OFF Switch | ................The ON/OFF switch turns the unit on |
| and off (O=OFF, l=ON). |
Suction Set | Fluid is drawn through the suction |
| set into the pump. |
Fluid Section | A piston in the fluid section moves up |
| and down to create the suction that |
| draws fluid through the suction set. |
Spray Gun | The spray gun controls the delivery |
| of the fluid being pumped. The gun |
| model you have depends on your |
sprayer model (refer to Spray Gun/Tip Chart, below).
Spray Hose ......................The spray hose connects the gun to
the pump.
Return Tube......................Fluid is sent back out through the
return tube to the original container.
PRIME/SPRAY Knob........The PRIME/SPRAY knob directs fluid
to the spray hose when set to SPRAY or the return tube when set to PRIME. The arrows on the PRIME/SPRAY knob shows the rotation directions for PRIME and SPRAY.
The PRIME/SPRAY knob is also used to relieve pressure built up in the spray hose (Pressure Relief
Procedure, page 6)
Pressure Control Dial .......The pressure control dial controls
the amount of force the pump uses to push the fluid (see graphic below for locations).
Spray Gun/Tip Chart
| Sprayer | Gun | Tip | Max. | Recommended |
|
| Model | Model | Size | Size | Filter |
|
| 1420 | .013 | .015 | Yellow (fine) |
| |
| 1620 | .013 | .015 | Yellow (fine) |
| |
| 1720 | .015 | .017 | Yellow (fine) |
| |
| 1920 | .017 | .019 | White (medium) |
| |
| 2120 | .017 | .021 | White (medium) |
| |
|
|
|
|
|
|
|
|
|
| Hose |
|
|
|
bracket Handle
Motor housing
Lubricating area (on front of face plate
Pail bracket
Spray hose
Spray |
| Fluid |
| ||
| section | |
tip |
| |
|
| |
Spray |
|
|
gun |
|
|
|
| Return |
|
| tube |
Suction
tube
ON/OFF
switch
O = OFF
l = ON
PRIME/ SPRAY knob
Suction set screen
Pressure Control Dial
Rear of motor shroud, | Front face plate, |
1420, 1620, 1720, | |
and 1920 models. | 2120 model |
Spray hose |
|
port |
|
Pressure Control Dial
PRIME/SPRAY knob
PRIME position SPRAY position
PRIME | SPRAY | PRIME |
|
| |
|
| SPRAY |
O
English Customer Service: | © 2002 Wagner Spray Tech - All rights reserved. |