Wagner SprayTech Wagner Power Sprayer 120 Manual for High Performance Airless Sprayers

PAINT CREW®

HIGH PERFORMANCE AIRLESS SPRAYER

OWNER’S MANUAL • READ THIS MANUAL FOR COMPLETE INSTRUCTIONS

TABLE OF CONTENTS:

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

COMPONENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

BEFORE YOU BEGIN SPRAYING . . . . . . . . . . . . . . . . . . . . 5

PURGING AND PRIMING. . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SPRAYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SPRAYING TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . 8

CLEANUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

INLET/OUTLET VALVES. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37-38

SERVICE CENTER LIST . . . . . . . . . . . . . . . . . . . . . . . . 39-43

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Need help? Call us first for answers fast.

Call Wagner Spray Tech toll-free if you have any comments or problems with this product.

1-800-328-8251

Wagner Technical Service

Visit us on the world wide web!

http://www.wagnerspraytech.com

1770 Fernbrook Lane, Minneapolis, MN 55447

SPECIFICATIONS:

Weight	25 lbs.
Capacity	2 gallon hopper
Power source	3/8 Hp universal motor
Power requirement	15 amp minimum circuit on 120 VAC,
	60 Hz current
Generator	8000	W
Spraying pressure	2800	PSI
Printed in China

Safety features	.................Spray gun trigger lock and guard;
	built-in tip safety guard; priming
	knob for safe pressure release.
	Conforms to UL STD 1450.
	Certified to CAN/CSA C 22.2
	NO 68-92.
Capability	Sprays a variety of paints, oil
	base, latex, primers, stains,
	preservatives and other
	nonabrasive materials.
	Do not use materials with flash
	points below 70°F (21°C).

This pump should not be used with textured materials, block filler, lacquers, industrial enamels, or asphalt sealer or materials containing HHC. See coating supplier if flash point is not listed on the container.

0503 • Form No. 0515801D

English