Makita LF1000 dimensions Back side of Table complete. Fig

P 13/ 30

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-7. Table Section (cont.)

DISASSEMBLING
6) Now the Table section can be removed from Guide fence	Fig. 32
by unscrewing nine M6x20 Hex socket head bolts from	[Table section turned over]
the back side of Table complete. (Fig. 32)
7) Remove Hex socket head bolt M8x50 and Flat washer 8	Table complete
from each end of Guide fence. (Fig. 33)
8) Insert a slotted screwdriver into the hole of Sleeve 8
on each end of guide fence, and lever it out from the hole
of Frame as illustrated to left in Fig. 34.
Note:
Hold Guide fence by hand to prevent from falling down.
Now Guide fence can be separated from Frame
as illustrated to right in Fig. 34.
Fig. 33
Guide fence	Frame

Flat washer 8

Hex socket head bolt M8x50

Fig. 34

Guide fence

Sleeve 8

Slotted screwdriver