Makita LF1000 dimensions Gear Section

P 8 / 30

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-4. Gear Section

DISASSEMBLING

1)Disconnect Tension spring 4 from Blade case. By removing Retaining ring S-42 with Retaining pliers ST-2N (No.1R003), Safety cover can be separated from Blade case. (Fig. 14)

2)By unscrewing four M5x16 Countersunk head screws, the Gear section can be separated from Blade case. (Fig. 15)

Fig. 14

Blade case

Tension spring 4

Safety cover

Retaining ring S-42

Fig. 15

Gear section

Countersunk

head screw M5x16

3)Remove Ball bearing 608LLB from Spindle with Bearing extractor (No.1R269), then Retaining ring S-15 with Retaining Ring S and R Pliers (No.1R291). Now Helical gear 46 can be removed by hand.

(Fig. 16)

Fig. 16

Ball bearing	Retaining	Key 4	Helical
608LLB	ring S-15		gear 46

4)Fix Bearing box in vise.

Note: It is not necessary to remove Ring 15 in this step because it can be used as a guide for Wrench for Bearing Retainer (No.1R340) when removing Bearing retainer 25-36.

Set No.1R340 on Bearing retainer 25-36, and turn clockwise to remove Bearing retainer 25-36 from Bearing box. Then remove Ring 15 from Spindle. (Fig. 17)

5)When removing Spindle from Bearing box, press from the Flange installation side. (Fig. 18)

Fig. 17 Fig. 18

No.1R340
Ring 15	Spindle
	Ring 15
(guide for No.1R340)
Bearing retainer
25-36

ASSEMBLING

Do the reverse of the disassembling steps.

Bearing box

Ball bearing 6202LLB

Spindle