Makita LF1000 dimensions Cross section of a, Pitches

P 16/ 30

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-8. Frame Section (cont.)

ASSEMBLING

1)Fasten Screw M10 to left Frame/ right Frame so that Pipe 32 complete/ Pipe 32 covers 2 pitches of the thread portion on the opposite side of the screw when the pipe is set in place over the screw. (Fig. 41)

Fig. 41

Frame, right

Pipe 32

Screw M10

Cross section of [A]

Pipe 32 complete (Pipe 32)

Screw M10

[A]

2 pitches

Pipe 32 complete

Frame, left

2)Tighten Frames with four M10 Hex nuts. (Fig. 38)

3)Assemble Lever to the right Frame. (Fig. 35 and 42)

4)Assemble Switch box to the left Frame. (Fig. 42)

5)Install each three Cushions to the right and left Frames.

Then to the right frame, fasten Leaf spring with Pan head screw M4x10, and fasten two M6 screws. (Fig. 43)

Fig. 42 Fig. 43

Lever

Frame, right

Frame, left

Operator's position

Switch box

Frame, left	Lever
Switch box	Frame, right
	Cushion
Pan head screw M4x10
	Screw M6
	Leaf spring