Launch audio devices control panel
Provides a shortcut to the Windows sounds and audio devices control panel.
Ring both headset and PC
This feature gives you the option to have the PC ringtone played on both the headset as well as the PC speaker.
When this feature is selected, the PC ringtone will be heard on both the PC speaker as well as the headset.
When this feature is not selected, the PC ringtone will only be heard on either the headset or the PC speaker based on how the PC audio has been set up.
Maintain headset to PC link
This feature forces the radio link to the PC to stay active even after the call has ended. This can eliminate the need to
Help us improve this software by allowing us to collect anonymous feature usage statistics When selected, this will allow Plantronics to collect data on feature usage patterns. This information will only be used by Plantronics to improve the quality of our future software and hardware products.
dial tone enabled
If this feature is selected, when a PC radio link is established, will assume the user is trying to place a VoIP call and provide a dial tone.
If this feature is not selected, when a PC radio link is established, will sit idle.
Audio sensing enabled
Audio sensing is a special feature supported by Plantronics wireless devices that can detect an audio signal at the USB port and automatically establish a PC radio link between the base and wireless headset without the user having to press the PC call button. If the parameter “ dial tone enabled” is selected, then every time a PC radio link is established the dial tone will be heard. However, the user may have pressed the PC call button to listen to music etc. and does not want to hear the dial tone. In this case, if the user selects the “Audio sensing enabled” parameter, the radio link will be established automatically when any PC audio is detected at the USB port, thus eliminating the need for the user to press the PC call button.
About tab The About tab provides
Plantronics Update Using Plantronics Update Manager, you can download new software and firmware versions
Manager when they are available. To change settings such as checking for updates manually or automatically or to install new updates, go to the Start menu > Programs > Plantronics > Plantronics Update Manager.
Check for updates automatically
Select the box "Check for updates automatically" and you will be notified automatically when new software and firmware updates are available.
34