Specific Safety Rules, Explanation of general view

ENGLISH

Explanation of general view

1	Bit grease	11	“Rotation only” symbol	21	Screwdriver
2	Bit shank	12	Loosen	22	Brush holder cover
3	Bit	13	Tighten	23	Brush holder cap
4	Chuck cover	14	Side grip	24	Screws
5	Change lever	15	Switch trigger	25	Connector
6	Shift lever	16	Adjusting dial	26	Black
7	“Rotation with hammering”	17	Clamp screw	27	White
	symbol	18	Depth gauge	28	Crank cap
8	Lock button	19	Power-ON indicator lamp	29	Hex wrench
9	Pointer		(green)	30	Hammer grease
10	“Hammering only” symbol	20	Service indicator lamp (red)	31	Drill chuck

SPECIFICATIONS

Model	HR3000C
Capacities
Tungsten-carbide tipped bit	................................30 mm
Core bit	90 mm
Wood	30 mm
Steel	13 mm
No load speed (min-1)	360 – 720
Blows per minute	1,650 – 3,300
Overall length	391 mm
Net weight	4.8 kg

•Due to our continuing program of research and devel- opment, the specifications herein are subject to change without notice.

•Note: Specifications may differ from country to country.

Power supply

The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They are double-insulated in accordance with European Standard and can, therefore, also be used from sockets without earth wire.

Safety hints

For your own safety, please refer to enclosed the safety instructions.

5.Be sure the bit is secured in place before opera- tion.

6.Under normal operation, the tool is designed to produce vibration. The screws can come loose easily, causing a breakdown or accident. Check tightness of screws carefully before operation.

7.In cold weather or when the tool has not been used for a long time, let the tool warm up for a while by operating it under no load. This will loosen up the lubrication. Without proper warm- up, hammering operation is difficult.

8.Always be sure you have a firm footing.

Be sure no one is below when using the tool in high locations.

9.Hold the tool firmly with both hands.

10.Keep hands away from moving parts.

11.Do not leave the tool running. Operate the tool only when hand-held.

12.Do not point the tool at any one in the area when operating. The bit could fly out and injure some- one seriously.

13.Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot and could burn your skin.

14.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.

SPECIFIC SAFETY RULES

GEB007-2

DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to rotary hammer safety rules. If you use this tool unsafely or incorrectly, you can suffer serious per- sonal injury.

1.Wear ear protectors. Exposure to noise can cause hearing loss.

2.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

3.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

4.Wear a hard hat (safety helmet), safety glasses and/or face shield. Ordinary eye or sun glasses are NOT safety glasses. It is also highly recom- mended that you wear a dust mask and thickly padded gloves.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury.

HR3000C specifications

The Makita HR3000C is a powerful and versatile rotary hammer designed for heavy-duty applications in the construction and renovation sectors. Known for its robust performance, the HR3000C features a 3-mode operation: hammering only, hammering with rotation, and rotation only. This functionality makes it suitable for a wide range of tasks including drilling into concrete, masonry, and heavy materials, as well as for chiseling and demolition work.

One of the standout features of the HR3000C is its impressive motor, delivering 800 watts of power. This ensures high performance even in tougher applications, enabling users to tackle demanding projects without worrying about overheating or diminished performance. The hammering rate of the HR3000C is up to 4,600 BPM, allowing for fast penetration into hard surfaces, thus enhancing productivity on job sites.

The HR3000C is equipped with a user-friendly design that focuses on comfort and control. It comes with a rubberized grip handle that reduces vibrations, making it easier to handle during extended use. The side handle can be adjusted to provide additional leverage and stability, ensuring that users can maintain precision and control regardless of the angle or position of the tool.

In terms of durability, the HR3000C is built with high-quality materials that withstand rigorous use. Its housing is designed to resist impact and wear, while the internal components are engineered to tolerate tough drilling conditions. Additionally, Makita incorporates technologies that enhance the lifespan of the tool, such as a dust-proof design that protects the internal workings from debris and dust.

The tool accepts SDS-Plus shank bits, providing versatility when it comes to bit selection. This compatibility allows users to easily switch between various bit sizes and types, further enhancing the HR3000C's adaptability to different tasks.

Another notable aspect is the quick-release chuck mechanism, which allows for swift and easy bit changes without the need for additional tools. This feature not only saves valuable time but also minimizes downtime between tasks.

In summary, the Makita HR3000C rotary hammer is an essential tool for professionals seeking reliable performance, comfort, and durability. With its multiple modes of operation, robust power, and user-centric design, it is well-equipped to handle a variety of demanding applications in construction and renovation. Whether users are drilling, chiseling, or performing heavy-duty demolition work, the HR3000C remains a dependable choice in the Makita lineup.