Manitowoc Ice STH003 Electrical Requirements Voltage, Minimum Circuit Ampacity, Gfci Requirements

ELECTRICAL REQUIREMENTS

VOLTAGE

The maximum allowable voltage variation is ±10% of the rated voltage on the ice machine model/serial number plate at start-up (when the electrical load is highest).

•A qualified electrician must determine proper wire size dependent upon location, materials used and length of run (minimum circuit ampacity can be used to help select the wire size).

•The maximum allowable voltage variation is ±10% of the rated voltage at ice machine start-up (when the electrical load is highest).

•Check all green ground screws in the control box and verify they are tight before starting the ice machine.

MINIMUM CIRCUIT AMPACITY

The minimum circuit ampacity is used to help select the wire size of the electrical supply. (Minimum circuit ampacity is not the ice machine’s running amp load.)

ELECTRICAL SPECIFICATIONS

WARNING

The ice machine must be grounded in accordance with national and local electrical code.

Ice	Voltage	Max. Fuse/	Minimum
	Phase	Circuit	Circuit
Machine
	Cycle	Breaker	Amps
CM50	115/1/60	15 amp	4.1

GFCI REQUIREMENTS

If GFCI (ground fault circuit interrupter) is required by local electrical code, it must be a breaker type.

18