BRAZING PROCEDURES FOR DANFOSS SOLENOID VALVES
•Danfoss stainless steel solenoid valves require a slightly different brazing technique than brass- bodied valves.
Copper clad stainless steel does not require as much flame contact as copper tubing.
Apply heat to the copper tubing first then the solenoid socket.
•15% silver solder is recommended although silver bearing solder in the 5% to 55% range can be used.
1.Remove coil and verify direction of flow.
DIRECTION OF | SV3069 |
| |
FLOW ARROW |
|
2.Fit valve in place and align stem @ 12:00.
90°90°
SV3070
3.Do not disassemble valve.
82
