Thermador T36IB70NSP manual Connecting the power2, Connecting the water4, Grounding, instruction

The appliance requires a 3￿wire receptacle.

A cold water connection is required for operation of

The receptacle must be installed by a licensed the automatic ice maker. The water pressure must

electrician only.be between 25 and 120 p.s.i. (1.72?8.25 bar).

The receptacle must be fitted with a 10A fuse or higherThe installation. must comply with local plumbing Please observe in this coherence the following table: regulations.

Electrical Shock Hazard

- Plug into a grounded 3 prong outlet. - Do not remove ground prong.

- Do not use an adapter.

- Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

The appliance comes with a 3￿wire power supply UL listed in the USA.

d WARNING

Connecting the power2.

d

Grounding	instruction
This appliance	must be grounded. In the event of
a malfunction or	breakdown, grounding will reduce

the risk of electric shock by providing a path of least resistance for the electric current.

d		WARNING		d
Improper connection of the equipment grounding
conductor may result in electric shock. Have the
appliance checked by a qualified electrician or
service technician if			you are in doubt as	to whether
the	appliance has		been properly grounded.

cord,

Connecting the water4.

A separate

shut￿off

valve must be installed for the

Appliance

Maximum load

at

one time

appliance

water

connection.

Bottom Freezer 36"

6

Ampere

The shut￿off valve for the water connection must not

behind the

appliance.

It is recommended to place the

Orient ground prong to the

bottom

as

shown

in

theshut￿off valve directly

next

to

the appliance (base

unit)

pictures.

or in

another easily

accessible

location.

For the installation

position

of

the

receptacle see

When

installing

the

water

connection, observe the

"Installation dimensions", page 8.

permitted

installation

areas

for the pipe. For the

permitted installation areas and dimensions see

•Installation

dimensions", page

9.

Additional

grounding

procedure3.

The supply pipe can be

located at the side on

the

Some local regulations may

require

a

seperate

(a), at the side on the left (b)

or underneath (c),

pag

ground.

In such cases, the required

accesseory

ground

wire,

Maximum outer diameter of the water pipe

clamp and screw must be

purchased

seperately.

(without fittings):

13/32" (10 mm).

Never ground

the

appliance to

plastic

plumbing

lines,Attach a

separate

shut￿off

valve

for the water

gas lines or water

pipes.

connection

in

a

suitable,

easily

accessible location.

Do not use

a

self￿piercing

valve!

8