Installation options
The different installation options are limited only by theIndividual appliances with partition design of the kitchen and the function of the finger
guard.
1. | 2. |
Individual unit
Side$by$Side | 3. | 4. |
|
* | * |
|
|
|
|
|
| i | Note |
|
| ||
|
|
|
|
| ||
|
| - | When dimensioning the partition for model 4, note | |||
|
|
|
| the thickness of the furniture fronts to prevent | ||
|
|
|
| damage if the doors are opened at the same tim | ||
|
| - | Use theExtreme Combination Side$by$Side | |||
|
|
|
| Heating kitf the gap between the appliances is | ||
|
|
|
| less than 6" (160 mm). |
|
|
|
|
|
| See the section on •Optional accessories" on | ||
|
|
|
| page 12. |
|
|
|
| - | 5 |
|
| |
|
| Minimum thickness of the partition/ " (16 mm). | ||||
|
|
|
|
| 8 |
|
|
|
| At the end of the kitchen units | |||
|
|
| If one side of the appliance is visible, a side panel | |||
* Partition required! |
| |||||
|
| be | used. |
|
|
i
When 2 appliances are installed SidebySide, the Basic Combination Side$by$Side Sealing must be used to ensure a stable connection.
See the section on •Optional accessories" on page 12.
The side panel must be connected firmly to the wall, kit the floor and overhead furniture/fixtures before the
appliance is placed in the cavity.
The dimensions of the side panel are taken from the opposite cavity wall. During installation ensure that the cavity is square and the exact size.
6