q
i
q
i
-
-
-
13.Attaching the appliance to the top of the cavity
qScrew the attachment plate lugs (top) to the
Unscrew the heightadjustable feet until the mark overhead furniture/fixtures.
on the base has reached the indicated guide dimension (1/4" / 32 mm).
It is very important to comply with this dimension for the subsequent alignment of the furniture fronts.
Align the furniture fronts with the spirit level.
Note:
Do not twist or jam the appliance inside the cavity! When unscrewing the heightadjustable feet, proceed gradually: Always alternate between left
and right, left and right, etc..
The adjustment of the rear feet is facilitated if the appliance is unloaded at the rear.
If using a wooden beam as an alternative antitip device according to point 5 of this installation manual, rotate the appliance all the way towards the wooden beam.
qFix the attachment plate side lugs (top) depending on the installation situation. If there is no gap or a slight gap, it is not necessary to fix the side l
qIf there is a fairly large gap above the appliance, wooden beam above the appliance, ensuring that the wooden beam fits the gap exactly.
21