q Precisely adjust the furniture door.
Align the furniture door with the double threaded bolts (Torx screwdriver).
qTighten the nuts on the adjusting rail. This will fix the side alignment of the door.
25.Attaching the furniture door (freezer compartment)
i
Now fit the furniture handles which are screwed q from behind!
i
Attach the bracket:
-Lift the furniture door slightly away from the appliance door.
-Push the side bracket on the left and right o the screws1.
-Insert the side bracket on the left and right in the fixing plate and slide over the2screw. Slowly lower the door.
Continue the process until the last side brackets (3.) have been inserted into the fixing plates and are positioned on the screws.
The two upper brackets1. (? on the left and right) have no side piece for insertion into the fixing pla
qClose the door and check that the depth of the furniture front is aligned with the adjacent fronts. If required, correct.
q q Hang the furniture door with adjusting rail over the
double threaded bolts.
q Screw the nuts a little onto the double threadedq bolts. Do not tighten!
Tighten the bracket screws to fix the depth alignment.
Close the door and check the side alignment. Correct by gently tapping the edge of the open furniture door with your hand.
30
