Thermador T36IB70NSP manual Loading the appliance door

This metal strip can be purchased from customer service as an optional accessory, see the section on •Optional accessories" on page 12.

2 adjacent furniture doors can be attached instead of one large door. These furniture doors must be connected to a metal strip on the rear.

Function of different parts:

1.Double threaded bolt on the adjusting rail:

for vertical adjustment of the furniture door.

2.Side brackets:

for adjusting the depth of the furniture front.

3.Nuts on the double threaded bolt:

for securing the furniture front to prevent lateral movement.

4.Lower brackets:

for securing the furniture front to prevent lateral movement.

19. Loading the appliance door

When	attaching		the furniture doors, it		is	recommended
to load the		door storage		compartments		in	the	applian
with	weights	in	order to	ensure that	the		gap	width is

precise as	possible.
Recommendations:
Refrigerator	compartment	55	lbs	/	25	kg
Freezer compartment		22	lbs	/	10	kg

20.Attaching the adjusting rail to the furniture door (refrigerator compartment)

iThe adjusting rail is the most important means of adjusting the furniture front.

				q		Unscrew the installation support part from the
						appliance	doors.
When attaching the metal strip to the furniture doors,
				andStore the			positioning aids, there will be used in
observe the	maximum possible length of the		screws
				i
the position	of the drill holes. Always screw into the					an installation		step later.
					best
load￿bearing	material of	the furniture door.		q		Remove the cover plate from the freezer
Never screw	into fillers,	decorative strips or	similar.			compartment		door.

i

Check the double threaded bolts on the adjusting rail. Both of them must project out of the door b 3/16" (5 mm).

25