SPRAY BAR DISASSEMBLY

The spray bar supplies water to the individual ice making cups. Water from the water pump sprays through the nozzles, located on the upper portion of the tubes.

1.Grasp one end of the spray bar, lift up and remove from seat formed in evaporator bucket.

2.Remove clamp on water inlet tubing by grasping both ears on clip and separating.

3.Apply food grade lubricant to ease re-assembly of spray bar components when necessary.

4.To re-install spray bar, position water inlet tubing on inlet ports, and squeeze clips until tight.

5.Reposition assembly on water trough seat. Nozzles and inserts can be removed for cleaning by unscrewing nozzles. Inserts are located inside the spray bar ports. The spray bar also disassembles for easy cleaning.

Remove

Clamp

37

Page 37
Image 37
Manitowoc Ice STH003 manual Spray BAR Disassembly