WATER SHUTTERS
The water shutter is designed to keep the spraying water from escaping the evaporator compartment.
To remove just the water shutters:
1.Grasp one end of the water shutter and lift up.
2.Pivot water shutter and disengage remaining end.
3.To
To remove water shutter assembly:
1.Slide evaporator bucket forward 1/2” (13 mm).
2.Lift shutter assembly straight up.
Grasp Water
Shutters Here
Water
ShutterShutters
Assembly
WARNING
Removing the water shutters while the water pump is running will allow water to spray from ice machine. Disconnect the electrical power to the ice machine at the electric service switch box and turn off the water supply.
32
