MAX. 1300°F
(700°C)
SV3071
4.Apply heat to copper tubing first and move flame toward valve socket.
A.Heat copper tubing for approximately 10 to 15 seconds then direct the heat to the solenoid socket
B.Heat the solenoid socket for 2 to 5 seconds and apply silver solder to joint.
C.Do not attempt to fill solenoid flange with solder. Solder will draw into socket.
5.Install new liquid line drier.
6.Leak check joints by pressurizing system with 150- psig nitrogen.
7.Evacuate and
8.Reinstall coil (using a twisting motion) and attach wiring.
SV3073
83
