Motorola quick start PageWriter 2000X Pager Specifications, Commonly Asked Questions

PageWriter 2000X Pager Specifications

Physical Dimensions

Size	3.75 x 2.85 x 1.2 in
	95 x 72 x 29 mm
Weight (w/battery)	6.7 oz
	190 g
Volume	9.3 in3
	153 cc

Graphics Display

1/8 VGA	16 lines x 30 characters
	240 x 160 pixels
	4-level gray scale
	EL backlighting
Message Area	9 lines x 27 characters

Power

Main Battery Pack	3.6 V NiMH
Charge Time	1 hr
Backup Cell	rechargeable
Battery Life	>7 days
Clock Retention Time
w/main battery removed	15 min
Max. Sound Pressure Level (at 12 inches)	72 dB

Memory

Total Memory	4.5 MB
	4 MB Flash
	3 MB (FLEX OS)
	1 MB (Applications and Data)
	512 KB RAM

Environment

Operating Temperature	32±to 122±F
	0± to +50±C
Storage Temperature	14± to 149±F
	-10± to +65±C
Electrostatic Discharge (no permanent damage)	15kV

78 PageWriter 2000X User’s Guide

Commonly Asked Questions

Your PageWriter 2000X Two-Way Wireless Communications Cen- ter is a dynamic messaging device. It monitors and processes your communications even when you are busy with other things. The following questions reflect situations that may occur and are orga- nized into four categories:

•PageWriter 2000X Pager

•Messaging

•Battery and Charger

•FLEX PC Partner

PageWriter 2000X Pager

Why won’t my pager power up?

Your PageWriter 2000X Two-Way Wireless Communications Cen- ter might not be accessing the power it requires.

•Make sure you have a battery in the battery compartment. If not, insert a fresh battery.

•Make sure the battery is inserted properly. Check that the + marking on the battery is positioned on the two-contact side of the battery compartment. Press the battery into the compart- ment to ensure the battery is seated properly. For more infor- mation, see “To replace the battery:” on page 17.

•Recharge the battery or insert a fresh battery.

•If the front LED lights when you replace the battery and the screen is still blank, your screen’s contrast may be too light. Adjust the contrast. See "My screen is too dark (or too light). How do I change it?".

My screen is too dark (or too light). How do I change it?

You can quickly change the contrast by pressing , then holding down until reaching the desired contrast. Your PageWriter 2000X Two-Way Wireless Communications Center also has a built- in calibration guide to help you select the best contrast level. For more information, see Customizing the User Interface.

Periodically, the date and time are incorrect. What causes this?

The clock will maintain its accuracy for about an hour after the battery has been totally drained of power. To retain date and time accuracy, replace the battery, as needed. During extended periods of non-use (i.e., overnight), place your pager in the plugged-in

Commonly Asked Questions 79