Motorola quick start System Setup, Holster, Turning On and Off Your PageWriter 2000X Pager

To connect the docking station to your computer:

1.Connect one end of the RS232 cable to your computer’s nine-pin serial port.

2.Connect the other end of the RS232 cable to the nine-pin connector in the back of the docking station.

9-pin Serial Ports

RS232 Cable

3.Insert the transformer’s round connector into the back of the charger.

4.Insert the transformer’s two-pronged plug into the power sup- ply.

5.Snap your PageWriter 2000X Two-Way Wireless Communica- tions Center into the charger. You are now ready to access the FLEX PC Partner application from your PageWriter 2000X Two-Way Wireless Communications Center’s Home menu wheel. See “FLEX PC Partner” on page 54 for more information on using the FLEX PC Partner application.

The Holster

The durable, clip-on holster allows you to comfortably wear your PageWriter 2000X Two-Way Wireless Communications Center on your belt or pocket. Additional accessories are also available. For more information, call 1-800-548-9954.

18 PageWriter 2000X User’s Guide

System Setup

Your PageWriter 2000X Two-Way Wireless Communications Cen- ter comes pre-configured and ready for use. Features are available that allow you to re-configure your pager to more closely reflect your lifestyle, set the date and time, and select the alert modes and types. For information on customizing other features, see “Custom- ize” on page 47.

Turning On and Off Your PageWriter 2000X Pager

The rechargeable battery in your PageWriter 2000X Two-Way Wireless Communications Center allows you to leave your pager turned on 24 hours a day and, depending upon usage, can sustain operation for approximately a week before requiring a recharge. However, your PageWriter 2000X Two-Way Wireless Communica- tions Center works much like your computer. Periodically turning off your pager assists in clearing the random-access memory (RAM) and can help optimize your pager’s performance. Turning off your pager at night will also lengthen the time of your battery’s charge.

TIP Incoming messages are stored by the paging service until your pager is turned back on and ready to receive messages. Turn your pager off at night when you do not want to receive messages, and place the pager in the plugged-in charger so it will be fully charged and ready for use in the morning. If you prefer to leave your pager on, use the Quiet Time feature to specify the time period that message alerts will not be played.

To turn on your pager:

Press any key.

To turn off your pager:

1.Press . -or-

2.Select from the menu wheel.

To reset your pager:

Turn off your pager as indicated in the previous procedure, then press any key to turn the pager back on.

-or-

1. Hold the pager face down.

System Setup 19