EnGenius Technologies 28-248 Accessories, Replacement Parts Service and Repairs

Page 26

SERVICE

REPLACEMENT PARTS

When servicing use only identical replacement parts. Check the parts list included for more information. Parts lists can also be found online at www.deltamachinery.com.

SERVICE AND REPAIRS

All quality tools will eventually require servicing, or replacement of parts due to wear from normal use. For assistance with your tool, visit our website at www.

deltamachinery.com for a list of service centers or call the Customer Care Department at 1-800-223-7278. All repairs made by our service centers are fully guaranteed against defective material and workmanship. We cannot guarantee repairs made or attempted by others. Should you have any questions about your tool, feel free to write us at any time. In any communications, please give all information shown on the nameplate of your tool (model number, type, serial number, etc.).

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Wood Cutting Band Saw Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules Important Safety InstructionsAdditional Specific Safety Rules Failure to Follow These Rules MAY Result in Serious InjuryGrounding Instructions Power ConnectionsMotor Specifications Extension Cords Functional DescriptionForeword Carton Contents Assembly Time Estimate AssemblyAssembly Tools Required Attaching the Motor Bracket to the StandAttaching the Motor to the Motor Bracket Attaching the TOP Plate to the StandMounting AN LVC BOX to the Cabinet Band SAW Used Without a Dust Collector Installing the Dust ChuteBand SAW Used with a Dust Collector Attaching the Door to the Stand Attaching the Belt to the SAW Pulley and the Motor Pulley Attaching the SAW to the StandAttaching the Motor Pulley Attaching the Table to the SAW Installing the Table Insert Attaching the Blade to the SAWAttaching the on / OFF Switch to the Stand Tilting the Table OperationStarting and Stopping the SAW Adjusting the 90 Degree Table Stop Setting the Adjustable StopsAdjusting the Blade Tension Disconnect the machine from the power sourceVertical Adjustment of the Upper Blade Guide Assembly Tracking the BladeAdjusting the Upper Blade Guides and Blade Support Bearing Adjusting Lower Blade Guides and Blade Support BearingTroubleshooting Guide Cutting CurvesTrouble Band SAW does not Come UP to Speed Band SAW Blades MaintenanceKeep Machine Clean Failure to StartReplacement Parts Service and Repairs ServiceAccessories Warranty Two Year Limited New Product WarrantyDelta Machinery
Top Page Image Contents