Craftsman owner manual Specification Chart, Safety Guidelines Definitions, Model No 919.152160

SPECIFICATION CHART
Model No.	919.152160
Running HP	0.8*
Bore	1-7/8"
Stroke	1-1/4"
Voltage-Single Phase	120V
Minimum Branch Circuit Requirement	10 amps
Fuse Type	Time Delay
Air Tank Capacity	6 gallon
Approx. Cut-In	120 PSI
Approx. Cut-out	150 PSI
SCFM @ 40 psig	3.7*
SCFM @ 90 psig	2.6*

*Tested per ISO 1217

Refer to Glossary for abbreviations.

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and under- stand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols.

	Indicates an		Indicates a potentially
	imminently hazardous		hazardous situation
situation which, if not avoided, will		which, if not avoided, may result in
result in death or serious injury.		minor or moderate injury.
	Indicates a potentially		Used without the
	hazardous situation		safety alert symbol
		indicates a potentially hazardous
which, if not avoided, could result in
		situation which, if not avoided, may
death or serious injury.
		result in property damage.

IMPORTANT SAFETY INSTRUCTIONS

This product contains chemicals known to the State of California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

Some dust contains chemicals known to the State of California to cause cancer, birth defects or other

reproductive harm such as asbestos and lead in lead based paint.

Do not operate this unit until you read and understand this instruction manual for safety,

operation and maintenance instructions.

SAVE THESE INSTRUCTIONS

3 - ENG N014212