Estimate run time and current battery charge. As the battery charge increases, the battery run time will also increase.
EST RUN T: 4 MIN 50%
System load. The system load indicates how much power is being used by the connect equipment. The percentage indicates the amount of the unit capacity currently being used.
SYS LOAD: 900W 90%
Input and output voltage.
INPUT VOLT: 120V
OUTPUT VOLT: 120V
INPUT Hz: 60Hz
OUTPUT Hz: 60Hz
Model number and firmware.
MDL#: J35B AV UPS
FW VER: 874.P0.D
Serial number.
SN#:
JB02008004444
Service contact information.
SERVICE TEL#:
Web support information.
WEB:WWW.APC.COM/
SUPPORT
Setup menu
Use the Setup menus to configure the unit. There are nine setup menus. Push the SETUP button to move to the next screen. Use the arrow keys to scroll up and down.
Note: The menus shown in this manual are for reference only. Information displayed on the unit may be different than shown here.
6 | A/V J Type Power Conditioner and Battery Backup |