APC SUA500PDR manual User Configurable Items, UPS settings

User Configurable Items

User Configurable Items

UPS settings

Settings are adjusted through PowerChute® software or optional Network Management Card.

Function	Factory	User Selectable		Description
	Default	Choices
Automatic	Every 14 days	• Every 7 days		Set the interval at which the UPS will execute a
Self-Test	(336 hours)	(168 hours)		self-test.
		• On start up only
		• No self-test
UPS ID	UPS_IDEN	Up to eight characters		Uniquely identify the UPS (i.e. server name or
		(alphanumeric)		location) for network management purposes.
Date of Last	Manufacture	mm/dd/yy		Reset this date when you replace the battery
Battery	Date			module.
Replacement
Minimum Capacity	0 percent	• 0%	• 60%	Specify the percentage to which batteries will
Before Return from		• 15%	• 75%	be charged following a low battery shutdown
Shutdown		• 30%	• 90%	before powering connected equipment.
		• 45%
Voltage Sensitivity	High sensitivity	High sensitivity		The UPS detects and reacts to line voltage
		Medium sensitivity		distortions by transferring to battery operation
				to protect the connected equipment.
		Low sensitivity
				In situations of poor power quality, the UPS
				may frequently transfer to battery operation. If
				the connected equipment can operate normally
				under such conditions, reduce the sensitivity
				setting to conserve battery capacity and service
				life.
Alarm Delay	Enable	• Enable		Mute ongoing alarms or disable all alarms
Control		• Mute		permanently.
		• Disable
Shutdown Delay	90 seconds	• 0 s	• 360 s	Set the interval between the time when the UPS
		• 90 s	• 450 s	receives a shutdown command and actual
		• 180 s	• 540 s	shutdown.
		• 270 s	• 630 s

6