Uniden EXV 958 manual Storing a Phone Number in Memory, To confirm, repeat the name, John Smith

Page 16
pause counts
2-digit memory location."
"Store mode. Enter the

Color profile: Disabled Composite Default screen

TIP

When the voice prompt says “Enter the phone number you want to store,” if you do not make an entry within 10 seconds, the handset beeps and the programming procedure cancels.

TIP

When the voice prompt says “Say yes or no,” if you don’t say anything within 6

STORING A PHONE NUMBER IN MEMORY

With VoiceDial, programming is easy. Just follow the preprogrammed voice prompts.

1) Remove the handset from the base.

2) Press store. The talk LED blinks and the monitor LED lights. You will hear:

For example: Press 0, then 1.

NOTE: To automatically select the first available (empty) memory location, press 0, then 0.

3)You will hear:"Say the name you want to store."

seconds, you will hear “louder please.” If you still don’t respond, the handset beeps and the programming

Example: say “John Smith.”

Then, 2 times, you will hear:

"Please repeat."

procedure cancels.

TIP

If you need a pause to separate groups of numbers during dialing, press pause. This 4 second

as one digit. Pressing pause more than once increases the length of the pause between numbers.

To confirm, repeat the name, “John Smith.”

If you don’t respond within 6 seconds, you will hear “louder please.” If you still don’t respond, the handset beeps and the programming procedure cancels.

NOTE: You can skip the VoiceDial and enter a phone number in memory without a name. Enter the number on the keypad, then press store (go to step 5).

4) You will hear:

"On the keypad, enter the

phone number then press

store

 

."

Use the keypad to enter the number you want to store (up to 16 digits). For example: enter 555-5555; then press store.

5)You will hear: "555 5555 stored memory 01."

Then, you will hear a confirmation beep.

14

I:...exv958final.vp

Fri Jun 19 20:20:17 1998

Image 16
Contents VoiceDial Contents Welcome EXV 958 FeaturesT R O D U C T I O N TIP Included in Your PackageDESK/TABLETOP Installation T T I N G U PPlug the AC adapter into a standard 120 VAC wall outlet Raise the base antenna to the vertical positionWall Installation Standard wall plate mountingDirect Wall Mounting Use only the Uniden AC adapter supplied with this phoneInstalling the Handset Battery Pack Charging the Battery PackSlide on the battery cover and snap it into place Initial battery chargingLow battery indicator Setting the PULSE/TONE SwitchAs possible. Return the handset to the base for recharging Adjusting Ringer Controls Ringer tone and volumeReceiver volume Automatic Digital Code SecurityCleaning Battery Contacts Ringer on or OFFPAGE/FIND Attaching the BeltclipStandard calls using the memory features Standard calls without using the memory featuresMaking & Receiving Calls Chain Dialing Changing ChannelsFlash & Call Waiting Handset Speaker PhoneProgramming Your PHONE’S Voice Memory ThroughVoice Memory Entry Tips Follow the voice prompts for additional guidanceStoring a Phone Number in Memory Example say John Smith Then, 2 times, you will hearTo confirm, repeat the name, John Smith Then, you will hear a confirmation beepFor example say My Bank Then, 2 times You will hear Storing a Mixed Mode NumberTo confirm, repeat the name My Bank You will hear Erasing a Stored Number Dialing a Stored NumberRemove the handset from the base Press store You will hear Say Yes. This erases the memory location Press storeReviewing Numbers in Memory Dial Announce ON/OFFPress rev. The talk LED flashes You will hear To turn the dialing announcement offIntegrated Answering Device FeaturesTurning the Answering System ON/OFF Setting the Clock I N G a N S W E RPress skip/repeat until you hear the correct AM/PM setting Exv958final.vp Fri Jun 19 202034 Setting Your Outgoing Message OGM Preset messagesAnnounce only feature Recording your personal OGMSelecting Message Time MemoSelecting a PIN Code VOX/CALLING Party Control FeatureTo set the first number Using the Reset Button Setting the Toll Saver SwitchReset button on the bottom of the base is used to Playing Your Messages After you have reviewedRepeating a Message Press play/stop to review your messagesReview your messages. The number of messages is announced SystemDeleting a Message Recording a ConversationReview your messages To stop recording, press memo againRemote Access Away from Home Function PressTroubleshooting O B L E M G G E S T I O NVertical position and the contacts are touching N E R a L S EN D S E T EXV 958 complies with FCC Parts 15Controls & Functions