Uniden EXV 958 manual Vertical position and the contacts are touching

Page 34

Color profile: Disabled

Composite Default screen

P R O B L E M

 

S U G G E S T I O N

 

 

 

 

Handset doesn’t ring or

The Nickel-Cadmium battery pack may be weak. Charge the battery

receive a page.

 

on the base for 15 to 20 hours without interruption.

 

Raise the base antenna vertically.

 

The handset may be too far away from the base.

 

Place the base away from noise sources.

 

The digital security code may be erased. Reset the digital code.

 

Make certain that the ringer on/off switch is in the RING ON position.

 

 

 

You hear only continuous

The power has been interrupted during a call.

static from handset.

Restore power to the base. Make sure the phone is not plugged into

 

 

 

an outlet controlled by a wall switch.

 

 

 

Handset does not fully charge.

If the phone is desk or tabletop installed, make sure the handset is in

 

 

the vertical position and the contacts are touching.

 

 

 

The answering system does

Make sure the base unit is plugged in.

not work.

Make sure the answering system is turned on.

 

 

Press RESET after an AC line spike.

 

 

 

The answering system does

Set the REC TIME switch to either the one minute or four

not answer calls.

 

minute option.

 

The memory may be full. Delete some or all of the saved messages.

 

 

 

Messages are incomplete.

The incoming messages may be too long. Remind callers to leave a

 

 

brief message.

 

The memory may be full. Delete some or all of the saved messages.

 

 

 

After a power failure, the

Record your personal outgoing message again. The default messages

outgoing message is deleted.

 

should remain.

 

 

 

No sound on the base unit

Adjust the speaker volume on the base unit.

speaker during call

 

 

monitoring or message

 

 

playback

 

 

 

 

 

Cannot access remote call-in

Make sure you’re using the correct PIN number.

features from another

Make sure that the touch-tone phone you’re using can transmit the

touch-tone phone.

 

tone for at least two seconds. If it cannot, you may have to use

 

 

 

 

another phone to access your messages.

 

 

 

If you are still unable to resolve the problems, contact Uniden

Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central,

Monday through Friday.

32

I:...exv958final.vp

Fri Jun 19 20:26:08 1998

Image 34
Contents VoiceDial Contents Welcome EXV 958 FeaturesT R O D U C T I O N TIP Included in Your PackagePlug the AC adapter into a standard 120 VAC wall outlet DESK/TABLETOP InstallationT T I N G U P Raise the base antenna to the vertical positionWall Installation Standard wall plate mountingDirect Wall Mounting Use only the Uniden AC adapter supplied with this phoneSlide on the battery cover and snap it into place Installing the Handset Battery PackCharging the Battery Pack Initial battery chargingLow battery indicator Setting the PULSE/TONE SwitchAs possible. Return the handset to the base for recharging Receiver volume Adjusting Ringer ControlsRinger tone and volume Automatic Digital Code SecurityPAGE/FIND Cleaning Battery ContactsRinger on or OFF Attaching the BeltclipStandard calls using the memory features Standard calls without using the memory featuresMaking & Receiving Calls Flash & Call Waiting Chain DialingChanging Channels Handset Speaker PhoneProgramming Your PHONE’S Voice Memory ThroughVoice Memory Entry Tips Follow the voice prompts for additional guidanceTo confirm, repeat the name, John Smith Storing a Phone Number in MemoryExample say John Smith Then, 2 times, you will hear Then, you will hear a confirmation beepFor example say My Bank Then, 2 times You will hear Storing a Mixed Mode NumberTo confirm, repeat the name My Bank You will hear Remove the handset from the base Press store You will hear Erasing a Stored NumberDialing a Stored Number Say Yes. This erases the memory location Press storePress rev. The talk LED flashes You will hear Reviewing Numbers in MemoryDial Announce ON/OFF To turn the dialing announcement offIntegrated Answering Device FeaturesTurning the Answering System ON/OFF Setting the Clock I N G a N S W E RPress skip/repeat until you hear the correct AM/PM setting Exv958final.vp Fri Jun 19 202034 Announce only feature Setting Your Outgoing Message OGMPreset messages Recording your personal OGMSelecting Message Time MemoSelecting a PIN Code VOX/CALLING Party Control FeatureTo set the first number Using the Reset Button Setting the Toll Saver SwitchReset button on the bottom of the base is used to Playing Your Messages After you have reviewedRepeating a Message Press play/stop to review your messagesReview your messages. The number of messages is announced SystemReview your messages Deleting a MessageRecording a Conversation To stop recording, press memo againRemote Access Away from Home Function PressTroubleshooting O B L E M G G E S T I O NVertical position and the contacts are touching N D S E T N E R a LS E EXV 958 complies with FCC Parts 15Controls & Functions