Uniden EXV 958 Direct Wall Mounting, Use only the Uniden AC adapter supplied with this phone

Page 7

Color profile: Disabled Composite Default screen

!

Use ONLY the Uniden AC adapter supplied with this phone.

!

DO NOT use an outlet controlled by a wall switch.

CAUTION

Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery. Refer to “Charging the Battery Pack,” page 6.

▼Direct Wall Mounting

If you do not have a standard wall plate, you can mount your phone directly on a wall. Before doing this, consider the following:

∙Select a location away from electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

∙Mount your phone within 10 feet of a working phone jack.

∙Make sure the wall material can support the weight of the base and handset. Use anchoring devices if necessary.

∙Use the #10 screws included with the wall mount adapter kit.

1)Insert 2 mounting screws 3-15/16 inches apart. Allow about 3/16 of an inch between

the wall and screw heads for mounting the phone.

2) Follow “Standard Wall Plate Mounting” steps 1 through 4 on page 4.

3)Plug one end of the

telephone cord into the TEL LINE jack on the base. Put the cord inside the molded channel on the bottom of the base.

4)Place the base on the screws and push down until it’s firmly seated.

5)Plug the AC adapter into a standard 120 VAC wall outlet. DO NOT use an outlet controlled by a wall switch.

6)Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery. Refer to “Charging the Battery Pack,” page 6.

S E T T I N G U P

5

I:...exv958final.vp

Fri Jun 19 20:14:58 1998

Image 7

Contents VoiceDial Contents Welcome EXV 958 FeaturesT R O D U C T I O N Included in Your Package TIPRaise the base antenna to the vertical position DESK/TABLETOP InstallationT T I N G U P Plug the AC adapter into a standard 120 VAC wall outletStandard wall plate mounting Wall InstallationUse only the Uniden AC adapter supplied with this phone Direct Wall MountingInitial battery charging Installing the Handset Battery PackCharging the Battery Pack Slide on the battery cover and snap it into placeLow battery indicator Setting the PULSE/TONE SwitchAs possible. Return the handset to the base for recharging Automatic Digital Code Security Adjusting Ringer ControlsRinger tone and volume Receiver volumeAttaching the Beltclip Cleaning Battery ContactsRinger on or OFF PAGE/FINDStandard calls using the memory features Standard calls without using the memory featuresMaking & Receiving Calls Handset Speaker Phone Chain DialingChanging Channels Flash & Call WaitingThrough Programming Your PHONE’S Voice MemoryFollow the voice prompts for additional guidance Voice Memory Entry TipsThen, you will hear a confirmation beep Storing a Phone Number in MemoryExample say John Smith Then, 2 times, you will hear To confirm, repeat the name, John SmithFor example say My Bank Then, 2 times You will hear Storing a Mixed Mode NumberTo confirm, repeat the name My Bank You will hear Say Yes. This erases the memory location Press store Erasing a Stored NumberDialing a Stored Number Remove the handset from the base Press store You will hearTo turn the dialing announcement off Reviewing Numbers in MemoryDial Announce ON/OFF Press rev. The talk LED flashes You will hearIntegrated Answering Device FeaturesTurning the Answering System ON/OFF I N G a N S W E R Setting the ClockPress skip/repeat until you hear the correct AM/PM setting Exv958final.vp Fri Jun 19 202034 Recording your personal OGM Setting Your Outgoing Message OGMPreset messages Announce only featureMemo Selecting Message TimeSelecting a PIN Code VOX/CALLING Party Control FeatureTo set the first number Using the Reset Button Setting the Toll Saver SwitchReset button on the bottom of the base is used to After you have reviewed Playing Your MessagesPress play/stop to review your messages Repeating a MessageSystem Review your messages. The number of messages is announcedTo stop recording, press memo again Deleting a MessageRecording a Conversation Review your messagesFunction Press Remote Access Away from HomeO B L E M G G E S T I O N TroubleshootingVertical position and the contacts are touching EXV 958 complies with FCC Parts 15 N E R a LS E N D S E TControls & Functions