Uniden EXV 958 manual Wall Installation, Standard wall plate mounting

Page 6

Color profile: Disabled Composite Default screen

HINT

Before choosing a location for your phone, read the “Installation Considerations” included in the “Precautions and Important Safety Instructions” brochure.

CAUTION

Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.

!

DO NOT use an outlet controlled by a

wall switch.

WALL INSTALLATION

▼Standard wall plate mounting

This phone can be mounted on a standard AT&T or GTE wall plate. To attach the wall mount adapter to the base:

1) Slide the wall mount adapter into the notches at the top of the base.

2)Pivot the wall mount adapter down and snap into place.

3)Plug the AC adapter into the base.

4)Wrap the AC adapter cord around the strain relief notch. Then,

put the AC adapter cord
inside the molded wiring
channel. Plug the
AC adapter into
a standard 120 VAC	Adapter
	AC
wall outlet.

5)Plug one end of the short telephone cord into the TEL LINE jack on the base. Place the telephone cord inside

the molded channel on the bottom

of the base.

Before you plug the other end of the telephone cord

into the modular jack on the wall, charge the battery.

Refer to “Charging the Battery Pack,” page 6.

6)Place the base on the posts of the wall plate and push down until it is firmly seated.

4

I:...exv958final.vp

Fri Jun 19 20:51:58 1998

Image 6

Contents VoiceDial Contents EXV 958 Features WelcomeT R O D U C T I O N TIP Included in Your PackagePlug the AC adapter into a standard 120 VAC wall outlet DESK/TABLETOP InstallationT T I N G U P Raise the base antenna to the vertical positionWall Installation Standard wall plate mountingDirect Wall Mounting Use only the Uniden AC adapter supplied with this phoneSlide on the battery cover and snap it into place Installing the Handset Battery PackCharging the Battery Pack Initial battery chargingSetting the PULSE/TONE Switch Low battery indicatorAs possible. Return the handset to the base for recharging Receiver volume Adjusting Ringer ControlsRinger tone and volume Automatic Digital Code SecurityPAGE/FIND Cleaning Battery ContactsRinger on or OFF Attaching the BeltclipStandard calls without using the memory features Standard calls using the memory featuresMaking & Receiving Calls Flash & Call Waiting Chain DialingChanging Channels Handset Speaker PhoneProgramming Your PHONE’S Voice Memory ThroughVoice Memory Entry Tips Follow the voice prompts for additional guidanceTo confirm, repeat the name, John Smith Storing a Phone Number in MemoryExample say John Smith Then, 2 times, you will hear Then, you will hear a confirmation beepStoring a Mixed Mode Number For example say My Bank Then, 2 times You will hearTo confirm, repeat the name My Bank You will hear Remove the handset from the base Press store You will hear Erasing a Stored NumberDialing a Stored Number Say Yes. This erases the memory location Press storePress rev. The talk LED flashes You will hear Reviewing Numbers in MemoryDial Announce ON/OFF To turn the dialing announcement offFeatures Integrated Answering DeviceTurning the Answering System ON/OFF Setting the Clock I N G a N S W E RPress skip/repeat until you hear the correct AM/PM setting Exv958final.vp Fri Jun 19 202034 Announce only feature Setting Your Outgoing Message OGMPreset messages Recording your personal OGMSelecting Message Time MemoVOX/CALLING Party Control Feature Selecting a PIN CodeTo set the first number Setting the Toll Saver Switch Using the Reset ButtonReset button on the bottom of the base is used to Playing Your Messages After you have reviewedRepeating a Message Press play/stop to review your messagesReview your messages. The number of messages is announced SystemReview your messages Deleting a MessageRecording a Conversation To stop recording, press memo againRemote Access Away from Home Function PressTroubleshooting O B L E M G G E S T I O NVertical position and the contacts are touching N D S E T N E R a LS E EXV 958 complies with FCC Parts 15Controls & Functions