Functional Description, Base Plate, Assembly

FUNCTIONAL DESCRIPTION

3	1
2	15	16
	15

18	13

17	6					14
17	6	8	9	10		11
			9			12
						12
CONTROLS AND COMPONENTS:
1.	Trigger				10.	Bevel Markings
2.	Trigger Lock				11.	Bevel Plate
3.	Speed Control Adjusting Switch				12.	Base Plate
4.	Gear Housing				13.	Hex Wrench Storage
5.	Blade Guard				14.	Power Cord
6.	Blade Holder				15.	Power Cord Strain Relief
7.	Blade				16.	Vacuum Attachment
8.	Roller Guide				17.	Hex Wrench
9.	Stroke Adjustment Switch				18.	Rip Fence Guide

ASSEMBLY

Disconnect plug from AC power source before assembling parts, making adjustments, or changing blades. Failure to remove electrical power could cause accidental starting of the jigsaw resulting in serious injury to the operator and/or damage to the tool.

ATTACHING THE BLADE

1.Firmly grip the plastic blade guard and slide it up to expose the blade clamp.

2.Using a hex wrench (provided in a slot beneath the motor), loosen the two hex socket-head screws on the blade clamp until it slides forward enough to open a slot for the blade.

3.Insert the blade into the blade clamp with the cutting edge facing to the front of the jigsaw.

4.Using a hex wrench, securely tighten the two hex socket-head screws on the blade clamp.

5.Using a hex wrench, loosen the two hex socket-head screws holding the bottom board and the guide roller on the saw housing.

6.Slide the guide roller forward until the back of the blade fits loosely in the center groove. Using a hex wrench, securely tighten the two hex socket-head screws hold- ing the guide roller and bottom board to the saw housing.