
7
ASSEMBLY CHECK
In the TEST MODE, ascertain that the assembly has been made correctly and IC BD is satisfactory (refer to Section 9).
In the test mode, perform the following test:
( 1 ) MEMORY TEST
RAM TEST
IC29 GOOD
IC35 GOOD
IC09 GOOD IC10 GOOD
IC11 GOOD IC12 GOOD
IC16 GOOD IC18 GOOD
IC20 GOOD IC22 GOOD
IC17 GOOD IC19 GOOD
IC21 GOOD IC23 GOOD
Selecting the RAM TEST in the test mode menu causes the
PRESS TEST BUTTON TO EXIT
( 2 ) C.R.T. TEST
C.R.T. TEST 1/2
132
RED
GREEN
BLUE
WHITE
PRESS TEST BUTTON TO CONTINUE
In the test mode menu, selecting C.R.T. TEST allows the screen (on which the projector is tested) to be displayed. Although the projector adjustments have been made at the time of shipment from the factory, color deviation, etc., may occur due to the effect caused by geomagnetism, the location building's steel frames and other game machines in the periphery. By watching the test mode screen, make judgment as to whether an adjustment is needed. If it is necessary, adjust the projector by referring to Section 14.
C.R.T. TEST 2/2
PRESS TEST BUTTON TO EXIT
27www.seuservice.com