Sega WaveRunner owner manual Adjusting the ON-SCREEN Contrast, Is skipped

ADJUSTING THE ON-SCREEN CONTRAST

Although the on-screen picture quality has been adjusted at the time of shipment from the factory, the on-screen contrast can be readjusted if desired. When the Game Board is replaced, readjustment may be necessary. Changing the CONTRAST causes the light and shade of the

on-screen images to be changed.

1 Press either or PIC - ADJ button.

TEST MODE

PIC-ADJ

P

CONTRAST BRIGHTNESS H.POSI V.POSI H.SIZE

The on-screen menu will have one item in purple and 6 items in white.

R G B SET

V.SIZE

EXIT

POSITION PIC-ADJ

ADJUST

RESET

Herein,	2	Choose CONTRAST by using either		or
		PIC - ADJ button.
procedure 2
			Have CONTRAST dis-
	PIC-ADJ
is skipped.		CONTRAST
			played in purple. Since

SELECT

		BRIGHTNESS	CONTRAST is selected
		H.POSI
		V.POSI	initially, no particular
		H.SIZE	operation is required in this
		V.SIZE
		EXIT	case.
3		Press the SET button (to decide selection).
	SET

When the selection of the CONTRAST adjustment mode is decided, the adjustment data scale bar appears on the screen.

CONTRAST	230
. . . . . . . . . . . . . . . . . . . .

4Make adjustment by using either or

ADJUST			ADJUST button.
								As the Cursor is moved, the
								adjustment data value
								changes. Make adjustment
								so as to obtain the desired
								on-screen contrast status.
			CONTRAST		156
			. . . . . . . .	. .		. . . . . . . .	. .
		5 Press the WRITING button (for storing and finish).
	WRITING
								The WRITING display
								appears and the adjustment
								data is stored.

		WRITING
￿	When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure 2 and press
	the SET button.
￿	To continue adjusting other menu items, repeat procedure 2 ~ 4 .

￿Unless the adjustment data is stored, the data in the adjusted--status will be erased at the time the power is turned off and the pre-adjustment status will remain when the power is turned on next time.

87 www.seuservice.com