Sega WaveRunner Static Convergence Adjustment, Press the R button to have the red adjustment mode

STATIC CONVERGENCE ADJUSTMENT

In the static convergence adjustment, each of red and blue images is comprehensively moved to and superimposed on the green color. If automatic color matching function is not sufficiently satisfactory, perform this adjustment. Be sure to perform automatic color matching before starting the above adjustment.

1 Keep pressing the TEST button for approximately 3 seconds.

TEST MODE

P

R G B SET

POSITION PIC-ADJ

	The screen will change to
ADJUST MODE
	ADJUST mode from the Game
	mode to cause the green test
	pattern to be displayed on the
	screen.

ADJUST

DO NOT PUSH THIS. 2

RESET

Press the R button to have the red adjustment mode.

SELECT

	The red test pattern is added to
ADJUST MODE
	the display. The frame color
	turns red and this signifies the
	red adjustment mode.

When either of 2 ~ 4 COLOR SELECT buttons (R, B) is pressed, if the color desired to be adjusted disappears, press that particular button again. For example, if the red color needs to be adjusted again at the stage of 4 , the R button need to be pressed twice.

3Make adjustment by using the ADJUST buttons.

		Make adjustment so as to have
ADJUST	MODE
		red superimposed on green.
		When red is superimposed on
		green, the color becomes
		yellow.

4Press the B button to have the blue adjustment mode.

ADJUST MODE	Similarly as in the case of red,
	adjust the blue color. When
	green, red, and blue are super-
	imposed, the color becomes
	white.

5Press the WRITING button (for storing and finish).

ADJUST MODE

WRITING

The WRITING display appears and the adjustment data is stored. After the data is stored, the Game mode returns.

www.seuservice.com 92