Adjusting the grinder
CAUTION
2 Preparing and using your IMPRESSA for the first time
gT Turn the Rotary Switch until HARDNESS is displayed. k T Press the Rotary Switch to enter the programme item.
16°dH
gT Turn the Rotary Switch until 25°dH is displayed.
kT Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
gT Turn the Rotary Switch until EXIT is displayed. k T Press the Rotary Switch to exit programming mode.
READY appears on the display.
T Close the cover of the Rotary Switch.
You can adjust the grinder continuously to suit the roast of your cof- fee.
If you adjust the fineness of grind when the grinder is not operating, the grinding wheel could be damaged.
TOnly adjust the fineness of grind when the grinder is run- ning.
The fineness of grind setting is correct if the coffee flows regularly from the coffee spout. A fine, thick crema is also formed.
Our recommendations:
ZSelect a fine setting for a light roast.
U If the fineness of grind setting is too fine, the coffee only drips from the coffee spout.
ZSelect a coarse setting for a darker roast.
U If the fineness of grind is too coarse the coffee flows too quickly from the coffee spout.
Example: To change the fineness of grind during coffee preparation, proceed as follows:
TOpen the cover of the bean container.
TRemove the aroma preservation cover.
TPlace a cup under the coffee spout.
19