6 Maintenance
Manual filter change
Clean machine
CAUTION
EYou can interrupt filter rinsing at any time. To do this, press any button.
EThe water may be slightly discoloured. This is not harmful to health and does not affect the taste.
Filter rinsing stops automatically after approx. 500 ml. The IMPRESSA heats up and is once again ready to use.
You can initiate the ‘Changing the filter’ operation manually.
Precondition: The filter is activated and READY is displayed.
TOpen the cover of the Rotary Switch.
kT Keep the Rotary Switch pressed until RINSE appears.
kT Press the Rotary Switch to enter the programme item.
C CLEANING
gT Turn the Rotary Switch until FILTER is displayed. k T Press the Rotary Switch.
CHANGE
T Close the cover of the Rotary Switch.
T Continue with the second prompt to take action (indi- cated by a T), as is described under ‘Change following a prompt’.
After 200 coffee preparations or 80
If the wrong cleaning agent is used, the machine could be damaged and/or traces of detergent could be left behind in the water.
TUse only original JURA care products.
EThe cleaning programme only lasts about 20 minutes.
EDo not interrupt the cleaning programme. The quality of cleaning will be impaired if you do so.
EJURA cleaning tablets are available from stockists.
@You can also try out the ‘clean machine’ operation online. Visit the Knowledge Builder at www.jura.com.
44
