Using and activating filter
2 Preparing and using your IMPRESSA for the first time
EWhen a coffee speciality has been prepared for the first time, it is possible that FILL BEANS is shown on the display as the grinder has not yet been completely filled with coffee beans. In this case prepare another coffee speciality.
Your IMPRESSA no longer has to be descaled if you are using CLARIS filter cartridges.
@You can also try out the ‘Insert filter’ operation online. Visit the Knowledge Builder at www.jura.com.
EPerform the ‘Insert filter’ operation without interruptions. This will ensure that your IMPRESSA always produces at its best.
Precondition: READY is displayed.
TOpen the cover of the Rotary Switch.
kT Keep the Rotary Switch pressed until RINSE appears on the display.
gT Turn the Rotary Switch until FILTER - is displayed. k T Press the Rotary Switch to enter the programme item.
NO -
gT Turn the Rotary Switch until YES w is displayed.
kT Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting. INSERT, the maintenance button c lights up.
TClose the cover of the Rotary Switch.
TRemove the CLARIS filter cartridge from the Welcome Pack.
TRemove the water tank and empty it.
TLift the cartridge holder and insert the filter cartridge into the water tank, applying slight pressure.
TClose the cartridge holder. It will click into place audibly.
TFill the water tank with fresh, cold water and reinsert.
17
