3 Familiarising yourself with the control options
Changing the coffee strength before preparation
Changing the amount of water during preparation
Example: Proceed as follows to to prepare a strong cup of coffee.
Precondition: READY is displayed.
TOpen the cover of the Rotary Switch.
TPlace a cup under the coffee spout.
gT Turn the Rotary Switch until STRONG is displayed.
oT Press the Coffee button for as long as STRONG is dis- played.
1 COFFEE / STRONG.
The
stops automatically. READY appears on the display.
TClose the cover of the Rotary Switch.
Example: Proceed as follows to prepare a 110 ML cup of coffee.
Precondition: READY is displayed.
TOpen the cover of the Rotary Switch.
TPlace a cup under the coffee spout. o T Press the Coffee button.
The grinding operation starts. 1 COFFEE and the coffee strength is then briefly displayed.
g T Turn the Rotary Switch during the brewing operation until 110 ML is displayed.
The set amount of water flows into the cup. Preparation stops automatically. READY appears on the display.
TClose the cover of the Rotary Switch.
Adjusting the default amount of water to suit the cup size
It is easy to make permanent settings for the amount of water for all coffee and milk specialities as well as hot water according to the cup size. As in the following example, adjust the amount of water once. Every time you prepare a drink in the future, this amount of water will be dispensed.
The permanent settings for adapting the amount of water to to the cup size for all coffee and milk specialities as well as hot water follow this model.
Example: To make permanent settings for the amount of water for an espresso, proceed as follows:
Precondition: READY is displayed.
24