Jura Capresso 13422 manual Permanent settings in programming mode

Permanent settings in programming mode

3 Familiarising yourself with the control options

T Place an espresso cup under the coffee spout. i T Press and hold the Espresso button.

1 ESPRESSO appears on the display.

iT Hold the Espresso button down until ENOUGH COFFEE ? appears.

iT Release the Espresso button.

Coffee preparation will start and the espresso will flow into the cup.

TPress any button as soon as enough espresso has flowed into the cup.

Preparation stops automatically. OK appears briefly on the display. The set amount of water for an espresso will be per- manently stored. READY appears on the display.

EYou can alter these settings at any time by repeating the above procedure.

You can easily adjust your IMPRESSA to your personal coffee blends and specialities. You can navigate through the easy-tounderstand programme steps and make permanent settings by simply turning and pressing the Rotary Switch.

You can make the following settings with the Rotary Switch:

Programme item	Sub-item	Explanation
RINSE	C–CLEANING,	T Select the desired maintenance pro-
	FILTER (only when the	gramme.
	filter is activated),	If no action is taken, programming mode is
	CLEAN,	exited automatically after approx. five sec-
	C–RINSE,	onds.
	DE-SCALE(only when
	the filter is not activated),
	CLEAN
BUTTONS	SELECT BUTTON	T Select your settings for the coffee and
		milk specialities and hot water.
FILTER -	YES w	T Indicate whether you operate your
	NO -	IMPRESSA with or without a CLARIS filter
		cartridge.

25