Resetting the products to works settings
Energy-saving mode
5 Permanent settings in programming mode
You can reset the values of all products individually to the works set- ting.
Example: Proceed as follows to reset the values of 1 espresso and 2 espressi to the works setting.
Precondition: The IMPRESSA must be switched off (standby).
TPress the Rotary Switch and the Espresso button for two sec- onds at the same time until OK appears.
The values of 1 espresso and 2 espressi are then reset to the works setting. The IMPRESSA must be switched off (standby).
An
ZSAVE -
U All coffee products as well as hot water can be prepared without having to wait.
U The machine heats up before preparing cappuccino or milk.
ZSAVE w
U Approx. 5 minutes after the last preparation the IMPRESSA switches to the
U Before coffee, hot water or milk can be prepared, the machine heats up.
Example: Proceed as follows to change the
Precondition: READY is displayed.
TOpen the cover of the Rotary Switch.
kT Keep the Rotary Switch pressed until RINSE appears. g T Turn the Rotary Switch until ENERGY - is displayed.
kT Press the Rotary Switch to enter the programme item.
SAVE -
gT Turn the Rotary Switch until SAVE w is displayed. k T Press the Rotary Switch to confirm the setting.
OK appears briefly on the display to confirm the setting.
ENERGY w
37