HP PL5060N 50 inch Plasma Using the System Menu, Starting the Setup Wizard, Using White Wash

Using the System Menu

Use the System menu to select the language for the OSD menus, find the software version, start the Setup Wizard, return OSD settings to default values, select the Standby Mode, and start White Wash to reduce the appearance of afterimage.

System menu	Options
OSD	■	Language: English/
		French/Spanish
	■	OSD timeout: Short/
		Middle/Long
Software Version	Shows TV software
	version number
Setup Wizard	Start the setup wizard:
	Yes/No
Default Settings	Press OK to recover all
	settings to default
	values.
White Wash	■	Yes/No
Standby Mode	■	Low power
	■	Fast power

Starting the Setup Wizard

In the Setup Wizard menu, choose Yes, and press OK. Then, turn off the TV, and turn it on again to start the Setup Wizard.

Returning to Default Settings

In the Default Settings menu, return all settings, including the channel list, to default value by selecting Default Settings, and then pressing OK.

Using White Wash

In the White Wash menu, select Yes and press OK to display an all-white screen for 3 minutes. This can reduce the appearance of an afterimage resulting from a fixed screen image.

n

Extensive use of White Wash may reduce the lifetime of the panel.

Selecting the Standby Mode (Power Control)

The Standby Mode menu setting can save energy. The setting determines the power used by the TV when it is turned off and enters standby.

■Low power: Consumes less power while in standby, uses approximately 20 seconds of power-up time.

■Fast power: Consumes more power while in standby, uses approximately 5 seconds of power- up time.

40HP Plasma HDTV User’s Guide