HP PL4260N 42 inch Plasma manual Setting Up the TV, Attaching and connecting the display speakers

3Insert the screws into the two holes on the back of the TV and tighten the screws.

4Attach speakers if you are using them. See “Attaching and connecting the display speakers” on page 9.

Setting Up the TV

Set up the TV by attaching and connecting the display speakers, connecting cables, and connecting the power cord.

Attaching and connecting the display speakers

The speakers come detached from the TV. Each speaker attaches to the side of the display and connects individually to the TV. The right speaker is on the right side of the display when it is viewed from the front.

The TV has a digital audio output or analog audio output that you can connect to a separate external amplifier.

To use a separate external amplifier or a stereo system, refer to “Connecting an external sound system” on page 16.

CAUTION: Unplug power for the TV and all connected components before attaching or connecting speakers.

1Position the TV upright on its stand.

2Place a speaker onto the TV, and insert the four screws to secure it.

3Plug the speaker into the TV.

4 Repeat these steps for the other speaker.

Setting Up

Setting Up 9