Daewoo DF-4501P user manual The disc was not finalized or not

Troubleshooting Troubleshooting

Symptom Cause Solution

Moisture Condensation

Can’t play disc recorded on this DVD Recorder+VCR on another DVD player.

The disc was not finalized (or not	Finalise the disc; see page 49.
made compatible if using a
DVD+RW).
Some players will not play even a	No solution.
finalized disc.
Discs recorded with copy-once	No solution.
material cannot be played on other
players.

Moisture condensation can occur:	In locations where moisture condensation may occur:
When the DVD Recorder+VCR is moved from a cold	Keep the DVD Recorder+VCR plugged into an AC
place to a warm place.	power outlet with the power on. This will help
	prevent condensation.
Under extremely humid conditions.	When condensation has occurred, wait a few hours
	for the DVD Recorder+VCR to dry before using it.

Cannot record or did not	The remaining blank space on the	Use another disc.
record successfully.	disc is insufficient.
	The source you are trying to record	You cannot record the source.
	is copy-protected.
	When setting the recording	Select the channel on the DVD
	channel, the channel is tuned on	Recorder+VCR’s built-in TV tuner.
	your TV’s tuner.
Timer Recording not	Clock in DVD Recorder+VCR is not	Set clock to correct time. See ‘Set Clock‘
possible.	set to correct time.	on page 19.
	Timer has been programmed	Reprogram Timer. See ‘Timer Recording‘
	incorrectly.	on page 42~44.
	TIMER indicator light does not	Reprogram Timer.
	appear after programming timer.
Stereo Audio Record and/or	TV is not Stereo-compatible.	No solution.
Playback not present.	Broadcast program is not in stereo	No solution.
	format.
	DVD Recorder+VCR A/V Out jacks	Make A/V connections. Stereo is
	are not connected to TV A/V In	available only via A/V output from DVD
	jacks.	Recorder+VCR.
	DVD Recorder+VCR Audio/Video	Select AUX or A/V source as TV input.
	Out is not selected for viewing at	Set TV audio channel mode to Stereo.
	the TV.
	DVD Recorder+VCR’s TV audio	See ‘Changing the TV Audio Channel‘ on
	channel is set to BIL or MONO.	page 31.
Remote control does not	The remote control is not pointed at	Point the remote control at the remote
work properly.	the remote sensor of the DVD	sensor of the DVD Recorder+VCR.
	Recorder+VCR.
	The remote control is too far from	Operate the remote control within 23 ft
	the DVD Recorder+VCR.	(7m).
	There is an obstacle in the path of	Remove the obstacle.
	the remote control and the DVD
	Recorder+VCR.
	The batteries in the remote control	Replace the batteries.
	are dead.

REFERENCE

54 55