Connectionsi
•There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of the connections described below. Whichever TV connection you use will work with all input sources.
•Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best connections.
•For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 13.
Caution
•Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.
•Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
•Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection system.
Connections
Connecting a TV
Choose one of the following TV connections, depending on the capabilities of your equipment.
RF Connection
Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied |
| |||||
CONNECTIONS | ||||||
(CH52). |
|
|
|
|
| |
Scart Connection |
| Rear of TV |
|
| ||
|
|
| VIDEO | ANTENNA | ||
COMPONENT/PROGRESSIVE VIDEO INPUT |
| S- INPUT | INPUT | |||
1 Plug a scart cable into the scart socket EURO AV1 at | Pr | Pb | Y |
|
| |
|
|
|
|
| ||
the back of the DVD Recorder+VCR and the |
|
|
|
|
| |
corresponding scart socket at the back of the TV set. | C |
| S |
|
|
|
(V) |
| V | R |
| ||
|
|
|
|
|
| |
2 Plug a scart cable into the blue scart socket EURO |
|
|
|
|
|
|
AV2/DECODER at the back of the DVD Recorder+VCR |
|
|
|
|
|
|
and the corresponding scart socket at the back of a |
|
|
|
|
|
|
Connecting Antenna/Cable |
|
1 Disconnect the antenna/cable from the rear of your TV. | Antenna |
2 Connect this cable to the jack marked ANT IN (FROM ANT.) on the rear panel of the DVD Recorder+VCR.
Flat Wire (300ohm)
OR
300/75ohm Adapter (Not supplied)
Antenna
Cable TV
Wall Jack
OR
| satellite decoder or set top box. |
|
| ||
1 | Connect the | Rear of DVD Recorder+VCR |
| Recorder+VCR to the | |
|
| |
| an |
|
2Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables.
Component Video Connection
1Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding input jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on your TV.
2Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables.
Rear of DVD Recorder+VCR
If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANT IN (FROM ANT.) jack on the rear panel of the DVD Recorder+VCR.
Use the supplied coaxial cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antenna input jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels (all cable channels).
Progressive Scan Connection
•If your television is a
•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
1Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding in jacks on your TV using an optional Y Pb Pr cable (C).
2Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables.
•Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds (or changing the Video Output in the Setup Menu; see page 23).
•Progressive Scan does not work with the RF, Audio/Video or
12 |
|
|
| 13 |
|
|
