Timer Recording
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
•Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete the program.
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing and holding [■STOP] for 3 seconds.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
•No disc is loaded.
•A
•Disc is protected in the ‘Disc Operation’ menu; see page 47.
•There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
Recording from an Externalxternal InputInput
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs.
1Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages 11 and 14.
2Use [ … †] or [INPUT] to select the external input to record from.
3Load a recordable disc or tape.
4Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), SEP (Very Low Quality - 8 hrs/disc)
VCR: SP (Standard Play), LP (Long Play - 2 times SP)
5Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 39.
6Press [STOP (■)] to stop recording.
Note
•A recording is already under way.
•The start time has already passed.
•Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
•You should set only one Timer Recording.
•You can choose replace old Timer Recording or not.
•Only one Timer recording will work.
Confirmation is not possible when:
•Disc is protected in the ‘Disc Operation’ menu; see page 47.
•There are already 49 titles recorded on the disc.
Timer Recording
Recording time is overlapped with existing entry.Replace it?
OKCancel
If your source is
Recording from a Digital Camcorder DV model only
You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD Recorder+VCR.
You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before | RECORDING |
recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14. | |
The source signal must be DVC SD format. | |
Some camcorders cannot be controlled using the DVD Recorder+VCR remote. | |
If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one. |
|
You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack. |
|
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
| You cannot record date and time information from a DV cassette. |
1 | Make sure your digital camcorder is connected to the front panel DV IN jack; see page 14. |
2 | Press [INPUT] repeatedly to select the DV input. |
3 | DV appears on the front panel display and the TV screen. |
Find the place on the camcorder tape from which you want to start recording. |
For best results, pause playback at the point you want to start recording. Depending on your camcorder, you can use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSE functions.
4Press [REC] once to start recording.
Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop the recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control during recording.
44 |
|
|
| 45 |
|
|
