Connections

Connections

Connecting an Amplifier/Receiver

Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic

Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital coaxial audio cable.

2You will need to activate the DVD Recorder+VCR’s digital output; see ‘AUDIO Settings‘ on page 24.

Digital Multi-Channel Sound?

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio/video receiver that supports one or more of the audio formats supported by your DVD Recorder+VCR (MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.

• Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is

selected.

Connecting Optional Equipment

To receive audio/video signals from other equipment, connect the AVF jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables.

Jack Panel of Accessory Component

(VCR, Camcorder, etc.)

CONNECTIONS SETUP

• If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce

 

a strong, distorted sound or no sound at all.

5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with

 

a digital multi-channel decoder.

To see the audio format of the current DVD on the on-screen display, press [AUDIO].

The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi- channel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVD Recorder+VCR’s digital audio outputs.

Rear of DVD Recorder+VCR

A

 

X

L

R

COAXIAL

AUDIO INPUT

 

DIGITAL INPUT

Amplifier (Receiver)

Front of DVD Recorder+VCR

Connecting a Digital Camcorder DV model only

Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RW recorder and digitally transfer DV tapes or DVD+R/RW discs to DVD+R/RW.

Use a DV cable (not supplied) to connect the DV In/Out jack of your DV camcorder/video deck to the front panel DV IN jack of the DVD Recorder+VCR.

This jack is for connection to DV equipment only. It is not

DV Digital Camcorder

 

compatible with digital satellite tuners or D-VHS video

DV

decks.

IN/OUT

 

DV IN

Front of DVD Recorder+VCR

14

 

 

 

15

 

 

Page 11
Image 11
Daewoo DF-4501P user manual Connecting an Amplifier/Receiver, Connecting Optional Equipment