LINE CONVERGENCE ADJUSTMENT

In the LINE CONVERGENCE ADJUSTMENT, the adjustment point of the column line (verti- cal) or row line (horizontal) is comprehensively moved for color matching. It is convenient to utilize this adjustment when the color of the column line or row line is uniformly deviated.

1Keep pressing the TEST button for approximately 3 seconds.

MODE WRITING

P

 

 

ADJUST MODE

 

 

The screen changes to ADJUST

 

 

 

 

 

 

 

 

 

 

 

 

 

mode from the Game Board mode

 

 

 

 

 

and displays the green test pattern.

 

 

 

 

 

R G B SET

POSITION PIC-ADJ

2Press the MODE button once to have the POINT ADJUSTMENT mode. Note 1

DO NOT PUSH.

ADJUST

RESET

￿ MARKER

 

 

ADJUST MODE

 

 

 

The crosshatch test pattern appears

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and the vertically long MARKER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECT

is shown.

3Using either R or B button, select the desired color to be adjusted. Note 2 Although the green color can also be selected by using the G button, to avoid the screen size change adjustment, do not choose green.

Note 1 When the MODE button is repeatedly pressed, the adjustment modes will circulate as follows:

STATIC ADJUSTMENT MODE

LINE ADJUSTMENT MODE

POINT ADJUSTMENT MODE

Note 2 When either of the COLOR SELECT buttons (R, B) is pressed, if the desired color to be adjusted disappears, press that particular button again.

 

 

 

 

 

 

The selected color is displayed by

 

 

 

 

 

 

 

 

 

 

 

ADJUST MODE

 

 

 

superimposing on green. The

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MARKER will be in the color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

selected.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4By using the POSITION buttons, move the MARKER to the position to be adjusted.

 

 

 

 

 

 

 

 

 

 

 

 

Use the

buttons to select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADJUST

 

MODE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the column line, and the MARKER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

moves in the right/left direction.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

However, the movable range is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

predetermined.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use the

buttons to select

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ADJUST

 

MODE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the row line and the MARKER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

moves in the up/down direction.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

However, the movable range is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

predetermined.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5Make adjustment by using the ADJUST buttons.

ADJUST MODE

The selected column line or row line (shown left is the column line) can be moved in the desired up/ down or right/left directions as applicable.

6Press the WRITING button (for storing and finish).

ADJUST MODE

WRITING is displayed and the adjustment data is stored. After the data is stored, the Game Board screen returns.

WRITING

www.seuservice.com

94

Page 103
Image 103
Sega WaveRunner owner manual Line Convergence Adjustment