Sega WaveRunner www.seuservice.com 100

www.seuservice.com 100

In this machine, the Cylinders are equipped with air dampers to soften the impact created by the

Ride movements. If the Cylinder's amplitude of vibration or the impact is excessive, adjust the

air dampers in the following procedure.

After turning the power off, close the Main Cock to start working. Starting workwithout closing the Main Clock can cause serious injury.Make adjustments as specified. Adjusting in the manner not specified can causemalfunctioning and parts damage.

Turn off power and turn the Circuit Protector inside the Front Cabinet OFF (see 10-1).

Remove the Rear Lid from the Mechanism Base and close the Main Cock (see 11-1).

Remove the Step R (see 11-1).

Loosen the Lock Nut of the Rear Cylinder's Adjuster fully to the bottom of the Adjuster.

Loosen the A, B, C, and D Adjusters by 90 degrees from the fully tightened point.

Tighten the lock nut so the adjuster will not rotate.

After making adjustments, play the game and check to see that the adjustments made are

correct.

ADJUSTER A

Loosen by

90 degrees.

ADJUSTER B

Loosen by

90 degrees.

ADJUSTER C

Loosen by

90 degrees.

ADJUSTER D

Loosen by

90 degrees.

REAR

CYLINDER

FIG. 17

ADJUSTER

LOCK NUT

After tightening the

Adjuster fully,

reverse it to the

specified position.

Loosen Tighten

After reversing the

adjuster to the specified

position, secure the

Adjuster with LOCK NUT.

AIR DAMPER ADJUSTMENT