2Connect one end of the earth wire to the AC Unit earth terminal, and the other end to the indoor earth terminal. The AC Unit earth terminal has a Bolt and Nut combination. Take off the Nut, pass the end of earth wire through the Bolt, and fasten the Nut.
3Note that the Earth Wire is incorporated in the Power Cord for the Areas of AC 120V (USA) and AC 220 ~ 240V, and therefore, this procedure is not necessary.
Connect the Earth Wire to the Earth Terminal.
FIG. 6. 5 b Earth Wire Connection
4Firmly insert the power plug into the socket outlet.
Insert the opposite side of Power Cord plug to the AC Unit's connector ("INLET").
5Perform wiring for the Power Cord and Earth Wire. Install protective
covering for the Power Cord and Earth Wire.
Wiring Cover
FIG. 6. 5 c Connecting Power Cord and Earth Wire
In case the Power Plug is apt to come out of place, secure the
Power Cord to the periphery of the AC Unit with the Cord
Clamp (an accessory).
HOW TO USE THE CORD CLAMP
25www.seuservice.com
