www.seuservice.com
57
10. AIR DRIVE
In order to prevent an electric shock and short circuit, be sure to turn power
off before performing work by touching the interior parts of the product.
Be careful so as not to damage wirings. Damaged wiring can cause an
electric shock or short circuit accident.
Do not touch undesignated places. Touching places not designated can cause
electric shock or short circuit.
This work should be performed by the Location's Maintenance Man or
Serviceman. Performing work by non-technical personnel can cause electric
shock hazard.
Do not insert hand into the mechanism so as not to cause hand and fingers
pinched in. Failure to observe this can cause a serious injury such as a
fracture.
When performing work such as parts replacement other than those specified
in this manual, be sure to contact where you purchased the product from and
confirm the work procedures and obtain precautions prior to performing work.
Inappropriate parts replacement and/or installing with erroneous adjustment
can cause an overload or the parts to come into contact, resulting in an electric
shock, a short circuit, and a fire.
Perform dewatering periodically. Gathered water can have compressor load
become greater and cause malfunctioning.
When the set pressure is adjusted, be sure to check if the adjustment is
appropriate.
Hot compressor can cause burn. After turning power off, wait until hot
portions cool off to start working.
Setting to an undesignated pressure can cause malfunctioning and trouble. Be
sure to use the designated pressure.