Sega WaveRunner owner manual Hexagon NUT

2

WIRING CONNECTIONS BETWEEN THE CABINETS

Perform the cabinet-to-cabinet wiring. With the ASSY Wire Tube, which installed to the Rear Cabinet at the time of shipment, connect between the Front Cabinet and the Rear Cabinet.

1Remove the fixed 4 truss screws and remove the front cabinet side Tube Bracket of the ASSY Wire Tube from the Rear Cabinet.

2Reinstall the removed 4 truss screws into the Rear Cabinet.

TRUSS SCREW (4),black

M4 X 12

PHOTO 6. 2 a

3There are one earth wire and a total of seven wire connectors in the front cabinet side of the ASSY Wire Tube. Connect the earth wire to the earth terminal stud on the Connector Panel of the Front Cabinet. Fasten with the hexagon nut in the order of the round earth terminal, the flat washer and the spring washer.

4Connect the seven wire connectors to each terminal on the Connector Panel of the Front Cabinet.

HEXAGON NUT

M4,flat & spring washers used.

PHOTO 6. 2 b

www.seuservice.com20