Sega WaveRunner owner manual Adjusting the ON-SCREEN Display Position

ADJUSTING THE ON-SCREEN DISPLAY POSITION

Although the on-screen display position (H. POSI, V. POSI) has been adjusted at the time of shipment from the factory, readjustment can be made if desired. When the Game Board is replaced, readjustments may be necessary.

TEST MODE

1

PIC-ADJ

P

Press either	or	PIC - ADJ button.
		The on-screen menu will have
CONTRAST
		one item in purple and 6 items in
BRIGHTNESS
H.POSI		white.
V.POSI

R G B SET

H.SIZE

V.SIZE

EXIT

POSITION PIC-ADJ

ADJUST

RESET

2Choose H. POSI or V. POSI by using either or PIC ADJ button.

PIC-ADJ

SELECT

CONTRAST BRIGHTNESS H.POSI V.POSI H.SIZE V.SIZE EXIT

Have the H. POSI or V. POSI displayed in purple. The Figure shows the status in which H.

POSI is selected.

3

SET

Press the SET button (to decide selection).

When the selection of the H. POSI or V. POSI is decided, the adjustment data scale bar appears on the screen.

H.POSI	128
. . . . . . . . . . . . . . . . . . . .

4

ADJUST

When making adjustments in vertical directions, also use either or ADJUST button.

WRITING 5

Make adjustment by using either or ADJUST button.

As the Cursor is moved, the adjustment data value changes. Make adjustment so as to obtain the desired on-screen position status.

H.POSI	156
. . . . . . . . . . . . . . . . . . . .

Press the WRITING button (for storing and finish).

The WRITING display appears and the adjustment data is stored.

WRITING

￿	When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure 2 and press
	the SET button.
￿	To continue adjusting other menu items, repeat procedure 2 ~ 4 .

￿Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned off and the pre-adjustment status will remain when the power is turned on next time.

89 www.seuservice.com